|
|
.JPG) |
|
.JPG "Bent it up on the bench vise by hand."){kind=small}
.JPG "Although the Agi-Tamer..."){kind=small}
.JPG "Tapered the ends in just a bit, to..."){kind=small}
.JPG "I gave it a go with my wimpy Harbor..."){kind=small}
.JPG "So I laid aside the slide hammer, and..."){kind=small}
.JPG "Some wash rags are placed to dam up..."){kind=small}
.JPG "With pressure beginning to deflect..."){kind=small}
.JPG "Now, here is what it looked like just..."){kind=small}
.JPG "I guess my flossing never reached up..."){kind=small}
.JPG "Plenty evidence of where the greasy..."){kind=small}
| With a bit of all-thread and some thickness added under the bar stock to transfer the stress to the edges, I was prepared to break that agitator. As a precaution, I found some used ones on ebay, in case that happens. | |
| Total images: 27 | Last update: 7/21/10 4:53 PM | Help | |